Fair dinkum 100% Aussie owned & operated

MIG / Stick / TIG Welder - WELDFORCE 255MST

The Weldforce 255MST delivers an impressive 250A @ 35% output, plus a host of impressive features to make your job easier. Work in manual mode, or synergic (select the material and thickness, and the machine takes care of the settings). PFC technology means the WF-205MST is extremely power efficient, delivering higher duty cycle and allowing use on long extension leads (up to 100m) and a great machine for use with generators where required. Stick/MMA & lift-TIG capability, job memory, 4-roll geared drive system, fan-on-demand to reduce dust intake, spool gun ready, advanced Stick and TIG functions... and a stack of other features too numerous list here! Comes with 4m MIG torch, 2-stage gas-saving regulator, full set of drive rollers for gas, gasless & aluminium wire, 4m earth and stick leads, 15A plug fitted, and cable strap system. Maximum recommended MIG welding capacity of 12mm (mild steel).

Where to buy

Image Image Part No. Description Unit of Issue Enquiry Qty
WELDER MIG/STICK/TIG WELDFORCE 255MST
WF-06167
WELDFORCE 255MST Standard Package: Machine, 4m MIG Torch, 4m Earth & Stick Leads, Gas Regulator, Drive Rollers, Input Lead & 15A Plug fitted
Unit:
EACH
WELDER MIG/STICK/TIG WELDFORCE 255MST
WF-06167
WELDFORCE 255MST Standard Package: Machine, 4m MIG Torch, 4m Earth & Stick Leads, Gas Regulator, Drive Rollers, Input Lead & 15A Plug fitted
WF-06167
EACH
WELDFORCE 255MST WELDER BUNDLE #3
WF-255MSTK3
WELDFORCE 255MST Bundle #3: Standard package as above + Gasless Wire + Trolley + Helmet + Gloves (Click on image to view contents)
Unit:
KIT
WELDFORCE 255MST WELDER BUNDLE #3
WF-255MSTK3
WELDFORCE 255MST Bundle #3: Standard package as above + Gasless Wire + Trolley + Helmet + Gloves (Click on image to view contents)
WF-255MSTK3
KIT

FUNCTIONS
> MIG (Gas / Gasless)
> Stick / MMA
> TIG (Lift-Arc)

AT A GLANCE:
> 250A max MIG output @ 35% duty cycle
> Weld up to 12mm Mild Steel (max MIG capacity)
> Fitted with 15A** 240V plug

KEY FEATURES:
> Power Factor Correction (PFC) - reduced power draw, increased duty-cycle, ideal for long leads & generators
> Manual or Synergic (enter material type & thickness and machine will set parameters automatically)
> 20+ Pre-set Programs - for different materials
> Job Save - store custom settings for up to 20 jobs
> Geared 4-Roll Wire Drive System - for super reliable wirefeeding
> Takes 5kg (D200mm) or 15kg (D300mm)spools
> Spool Gun Ready
> Generator Compatible - min 13kva, ideal 15+kva
> Fan-on-Demand - reduces dust intake
> Stressed-Tested - to 440V & over-specified componentry for reliability
> 3 year warranty*
> Robust & Portable, weighs 26kg
> Optional Stick/MMA VRD function (Supplied as standard with VRD NOT active. VRD can be activated by an authorised agent/distributor if required)

INCLUDES:
> MIG Torch 4m BZL 25
> Earth Lead H/Duty 4m
> Stick Lead H/Duty 4m
> Gas Regulator
> Driver Roller for 0.6/0.8mm steel/solid wire
> Driver Roller for 0.9/1.2mm steel/solid wire
> Driver Roller for 0.8/0.9mm gasless wire
> Driver Roller for 1.0/1.2mm aluminium wire
> Cable Retaining Strap
> Long Power Input Lead 3m

OPTIONAL ACCESSORIES:
> Spool Gun BZL 25 8m (part no WC-06203)
> TIG Torch #17 4m with Remote Control (part no WC-06234)
> T100 Welding Trolley (part no WC-06235)

COMMON SPARE PARTS:
> MIG Torch Spares (BZL 25)
> Drive Rollers

RELATED INFO & ARTICLES
Warranty Registration
What is an Inverter Welder (or plasma cutter)? About Inverter technology
What is Duty Cycle & How is it Calculated?
Using Generators to power inverter welders & plasma cutters
What is MMA (stick) welding? About the MMA process
MMA (Stick) Welding: What is Hot Start, Arc Force & Anti-Stick?
MMA (Stick) Welding: What is Open Circuit Voltage (OCV)?
What is TIG welding? About the TIG process
TIG Welding: What is Scratch-Start, Lift-Arc and HF Ignition?

*Standard warranty 2 years, with 1 year extension if registered at Weldclass.com.au/WeldforceWarranty
**15 Amp plug fitted for commissioning purposes only. To obtain full output, 25A or 32A plug & 4.0mm input cable should be installed by the user.

Chelsea - WA
How likely would you be to recommend this product to a friend? (10 = very likely) = 1
Comments: The welder has done nothing but break, wire constantly getting stuck in the tips and liner
12-Feb-2020

Dan - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Haven't actually had a chance to use the machine yet.
07-Feb-2021

Andrew - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 9
Comments: Very happy with the machine. Purchased with Spoolgun for Aluminium. Only problem so far was its bigger than the Transmig 175 so doesn't fit on the welding trolley.... :)
05-Feb-2021

Doug - NT
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Very well built machine. Extremely happy with it. Ordered the machine in December 2020 but it only arrived in Alice first week of Jan 2021.
22-Jan-2021

Colin - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Great welder, should do all my jobs with ease. I like the 4 roller wire feed.
10-Jan-2021

David - NSW
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: All fine so far
23-Dec-2020

Robert - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: A little bit complicated to set up. Need an easy reference guide to settings to use on certain size material.
16-Dec-2020

Peter - QLD
How likely would you be to recommend this product to a friend? (10 = very likely) = 10
Comments: Its perfect for what i need and is so easy to use.
27-Nov-2020

Gary - VIC
How likely would you be to recommend this product to a friend? (10 = very likely) = 8
Comments: Coming from a old school Mig, the machine with the computer control of weld via the synergic settings is taking some getting used to. I feel like just using program 0 so that I can set up as per original tech, but am persevering with the other setups. General quality seems to be good, but haven't used it much so can't say about longevity etc. The wire feed seems to be good quality and robust and was a factor that I considered in the purchase of the unit. The setting of the unit to restrict the machine to 200 A is a good feature, but perhaps it should be set on by default, as my machine powered up with the full 250A capacity and although I do have a 32 A feed, the supplied lead is only certified for 15A afaik.
06-Oct-2020

Donald - VIC
I believe the machine will be ideal for my needs
18-Jan-2020

Emma - QLD
Love It!
25-Oct-2019

Joe - QLD
Great so far
20-Sept-2019

David - QLD
Great unit with loads of features
11-Sept-2019

Zadok - QLD
Looks good, nice and portable. Keen to see how it goes on a generator.
22-Jun-2019