Fair dinkum 100% Aussie owned & operated

Wire - MIG Stainless-Steel PLATINUM 316Lsi

Premium 316LSi grade MIG (GMAW) wire for welding 300 & 400 series stainless-steels. Platinum series, no quality short-cuts: Manufactured with strict quality-control, layer-wound for reliable wire feeding.

Where to buy

Image Image Part No. Description Unit of Issue Enquiry Qty
WIRE-MIG S/STEEL ER316Lsi 0.8MM 1.0KG
P2-MW316L04/08
100mm/1.0kg Spool 0.8mm
Unit:
EACH
WIRE-MIG S/STEEL ER316Lsi 0.8MM 1.0KG
P2-MW316L04/08
100mm/1.0kg Spool 0.8mm
P2-MW316L04/08
EACH
WIRE-MIG S/STEEL ER316Lsi 0.9MM 1.0KG
P2-MW316L04/09
100mm/1.0kg Spool 0.9mm
Unit:
EACH
WIRE-MIG S/STEEL ER316Lsi 0.9MM 1.0KG
P2-MW316L04/09
100mm/1.0kg Spool 0.9mm
P2-MW316L04/09
EACH
WIRE-MIG S/STEEL ER316Lsi 0.8MM 5KG
2-MW316L08/08
200mm/5kg Spool 0.8mm
Unit:
SPL 5KG
WIRE-MIG S/STEEL ER316Lsi 0.8MM 5KG
2-MW316L08/08
200mm/5kg Spool 0.8mm
2-MW316L08/08
SPL 5KG
WIRE-MIG S/STEEL ER316Lsi 0.9MM 5KG
2-MW316L08/09
200mm/5kg Spool 0.9mm
Unit:
SPL 5KG
WIRE-MIG S/STEEL ER316Lsi 0.9MM 5KG
2-MW316L08/09
200mm/5kg Spool 0.9mm
2-MW316L08/09
SPL 5KG
WIRE-MIG S/STEEL ER316Lsi 0.9MM 12.5KG
2-MW316L12/09
300mm/12.5kg Spool 0.9mm
Unit:
SPL 12.5KG
WIRE-MIG S/STEEL ER316Lsi 0.9MM 12.5KG
2-MW316L12/09
300mm/12.5kg Spool 0.9mm
2-MW316L12/09
SPL 12.5KG
Disclaimer:
Any product application information on this web page is presented as "typical” and an indicative guide only, without guarantee or warranty, and Weldclass expressly disclaims any liability incurred from any reliance thereon. No data is to be construed as an official recommendation for any welding condition or technique by Weldclass. The correct product(s), settings and techniques will vary in each application and users should conduct their own research to determine the correct product and method to use in their situation. E.&O.E.

Operating Information:
> Shielding Gas*: Use with Argon + 1-2% Oxygen, or Argon + 1.5-2.5% CO2, or Argon + Helium + CO2 variations
> Polarity: DC+ (Wire/torch positive, Earth negative)
> Positions: All-positional

*Whilst 100% Argon can be used for TIG welding of stainless, MIG requires the addition of CO2 or Oxygen (&/or Helium). Attempting to MIG weld stainless-steel with 100% Argon will result in poor weld quality and is NOT recommended.

Used this product before? We would love to get your comments... be the first to review!