Fume Extraction Grinding & Welding Table ALLCLEAR® MX150M

This downdraft table variant of the ALLCLEAR® MX150M is one of the most compact and versatile welding and grinding fume extraction tables on the market. It runs on a 230V 10A power supply, so it can be used in almost any facility. A 0.43m2 base unit footprint, overall weight 89kg and removable table top make it easy to transport and manoeuvre.
It uses the same extractor unit as the MX150M mobile extractor (LEV), which is tested to and compliant with AS/NZS ISO 21904 W3**. Like all ALLCLEAR® units, it is designed with extraction volume performance, spark management and filter life as priorities. Fan capacity of 2,500m3/hr maximises extraction volume, critical for helping workplaces comply with WEL fume limits. A spark deflector system shields the filter from sparks and coarse particles, reducing fire risk and extending filter life. The cleanable, reusable sinTexx Plus nanofibre cartridge filter provides low pressure drop and long service life. An exhaust filter provides the 3rd safety filter stage and diffuses discharged air to reduce turbulence.
A filter access door allows in-situ manual cleaning without removing the filter or exposing the operator to extracted material. Particles separated by the spark deflector and dust from filter cleaning collect in an internal drawer, emptied from outside the unit. Visual and audible low airflow/clogged filter alarms and an hour meter take the guesswork out of maintenance scheduling. The W1200 x D800mm table top can be swapped for a 3m extraction arm or 10m hose. A great choice for general welding and grinding applications.

Get a Quote | Request a Demo
Image Image Part No. Description Retail Incl. GST Where to Buy Enquiry Qty
Fume Extraction Welding/Grinding Table ALLCLEAR MX150M Downdraft 1200x800mm 1ph/230V 10A Weldclass
WMX150MK3
ALLCLEAR MX150M Fume Extraction Grinding & Welding Table
1200x800mm Table Top
1ph/230V 10A
Retail Incl. GST: $6,950.00
Fume Extraction Welding/Grinding Table ALLCLEAR MX150M Downdraft 1200x800mm 1ph/230V 10A Weldclass
WMX150MK3
ALLCLEAR MX150M Fume Extraction Grinding & Welding Table
1200x800mm Table Top
1ph/230V 10A
WMX150MK3
$6,950.00
Disclaimer:
*Conditional extended 7 year warranty offer: click click here for details, registration is required after purchase. **Note that AS/NZS ISO 21904 (W3) compliance applies to the MX150M mobile extractor (LEV) variant. Downdraft tables are excluded from the scope of this standard.
WMX150MK3 141.22

  

AT A GLANCE:

  • Downdraft variant of, and uses the same fume extraction unit as the MX150M mobile extractor (LEV), which is tested to and compliant with AS/NZS ISO 21904 W34
  • 7 Year Warranty Offer1
  • For welding & grinding fumes
  • Operates on 230V 10A single phase power
  • Multiple configurations: also available with 3m arm, or 10m hose & hood (chose with initial purchase, or add/modify later)
  • One of the most compact, transportable, and versatile downdraft tables on the market: extractor unit weighs 59kg with 0.43m² footprint (overall weight with table top 89kg)
  • Cleanable filter for longer filter life & reduced operating costs
  • In-situ filter cleaning: access via filter cleaning door, clean with compressed air nozzle
  • Special spark deflector significantly reduces fire risk & extends filter life2

 

APPLICATIONS

  • General MIG / TIG / Stick welding
  • Light to medium grinding of steel or stainles-steel
  • Oxy brazing and soldering
  • In high/heavy fume (eg flux-core wires) and/or heavy grinding applications, downdraft models such as TA400 and TA500 with auto-cleaning and larger filters/capacity are recommended
  • NOT suitable for cutting (including oxy & plasma cutting & gouging)5
  • WARNING: NOT suitable for aluminium grinding, or extraction of fumes that contain aluminium dust, oil mist, gases, or water vapour3

 

FEATURES

  • 3 stage filtration: Spark deflector, cartridge filter & downstream safety filter
  • Cleanable cartridge filter for extended filter life & significantly lower operating costs vs traditional box filters
  • Special spark arrestor deflection plate shields the filter from sparks & coarse particles (redirecting them to the dust collection tray), significantly reducing the risk of burnout / fire2, and further increasing filter life
  • Cleanable sinTexx Plus nanofiber filter provides consistent air flow rate (minimal drop in suction power) over the life of the filter
  • Special cleaning door allows for ‘in situ’ filter cleaning (no need to remove filter)
  • Easy and safe access to ‘clean’ side of filter = operator is not exposed to captured fume dust during cleaning
  • High extraction performance (max air flow: 2,500m³ / hour)
  • Dust drawer allows allows collected dust to be removed safely, from outside the unit
  • Safety exhaust filter reduces turbulence in discharged air and captures particles if main filter is damaged
  • Control panel includes low air flow / clogged filter alarms and hour meter, to take the guesswork out of maintenance scheduling.

 

SPECIFICATIONS

  • Power supply: Single phase ~230V 10A
  • Dimensions: L561 x W765 x H740mm (extractor unit only)
  • Table Top Dimensions: 1200 x 800mm
  • Weight: 59kg (extractor unit only)
  • Motor size: 1.1kw
  • Max air flow: 2,500m³ / hour
  • Filter type/size: Cleanable/reusable sinTexx Plus nanofiber cartridge, M-class, 8m²
  • Filter cleaning: Manual (access via filter cleaning door, clean with compressed air nozzle)
  • Noise level: 75 dBA
  • Controls and alerts: On/off, filter clog (low airflow) visual and audible alarm, hour meter 

 

OPTIONAL ACCESSORES & COMMON SPARE PARTS

  • Main cartridge filter M-class (W06841)
  • Safety / exhaust filter (W06879)
  • 10m hose with hood and magnetic stand, can be installed in place of table top (W06843)

 

1Standard warranty 1 year, with extended 7 year warranty available if registered online after purchase, click here for details.   
2Regular maintenance must be carried out, and all warnings and instructions provided in user manual and on the unit must be followed, for ongoing safe use and prevention of fire hazards. Optional W06842 capture hood spark filters should always be used in any application where high levels of sparks and spatter are present or expected. Poor maintenance and disregarding of instructions and warnings may result in fire and other hazards that can cause damage, injury, and death.    
3Aluminium dust, including grinding dust, can be explosive when airborne, and for this reason, fume extractors and downdraft tables should not be used for extraction of aluminium grinding dust (this does not apply to aluminium welding fumes, which can be safely extracted). Oil mist and gases can also cause explosion. Water vapour will damage the filter.
4AS/NZS ISO 21904 (W3) compliance applies to the MX150M mobile extractor (LEV) variant. Downdraft tables are excluded from the scope of this standard.x
5Compared to welding and grinding, Plasma and Oxy-Fuel cutting processes produce large volumes of hot and/or molten metal/dross particles that are projected downwards. This can cause: a) a high rate of wear to the table top and spatter/dross build-up, b) rapid filter clogging and loss of fume extraction performance, c) fire hazard if filter systems become worn or overwhelmed with a large volume of hot particles/dross.