Shop Now
From Our Blog
-
Weldclass Acquires ALLCLEAR Fume Control
We are excited to announce that Weldclass has acquired AllClear Fume Control -
Monthly Giveaway with Home Built by Jeff
Welcome to the Weldclass monthly giveaway with Home Built by Jeff.
Filler Rod - Aluminium 5356
5356 Aluminium filler rod for TIG welding a wide range of aluminium alloys, general aluminium fabrication and repair. Available in 1.6mm, 2.4mm & 3.2mm in 5kg bulk packs or 0.5kg handy packs.
Also Known As:
TIG rod
Disclaimer:
Any product application information on this web page is presented as "typical" and an indicative guide only, without guarantee or warranty, and Weldclass expressly disclaims any liability incurred from any reliance thereon. No data is to be construed as an official recommendation for any welding condition or technique by Weldclass. The correct product(s), settings and techniques will vary in each application and users should conduct their own research to determine the correct product and method to use in their situation. E.&O.E.
WC-00221 50
APPLICATION INFO:
> For a wide range of aluminium alloys, general aluminium fabrication and repair
> 5% Magnesium content
> AWS Classification AWS A5.10 ER5356
Downloads
Related Products
-
5356 grade MIG (GMAW) wire for welding a wide range of magnesium-bearing aluminium alloys. One of the most widely-used grades of aluminium wire. A tried and proven quality wire, manufactured with strict quality-control, layer-wound for reliable wire feeding. Available in 0.9/1.0/1.2mm in 0.45/2/6kg spools.
-
Now available with 7-year warranty.
If you're looking for the best TIG welding results on Aluminium, Steel, Stainless and more... the 201T is here to help! An Impressive 200A @ 30% output (AC TIG), very compact & portable, weighing just 8kg. Controls include; choice of HF or Lift-Arc ignition, pulse frequency and width adjustment, slop-up & slope-down, pre-gas & post-gas, AC Square-wave & balance controls, remote current adjustment on TIG torch handle, optional foot control... plus impressive Stick/MMA performance with capacity to run up to 4mm electrodes. Comes with: 8m #26 (200A) TIG torch, gas regulator, 4m earth & stick leads, shoulder strap, cable strap to keep your leads tidy and a long 3m power input lead with 15A plug fitted.
*Also known as Weldforce 201T - read more. -
Standard TIG torches with valve, to suit most inverter welders that have a basic / standard lift-arc or scratch-start function, where machine does not have an internal TIG gas line / fitting and gas hose on torch is connected directly to the gas bottle / regulator.
Ready-to-weld TIG torch packages, with valved flexible head, 1.6/2.4mm parts & tungsten electrodes. Available in #17 series (150A) 4m, or #26 series (200A) 4m & 8m. Now with 7-year warranty offer.
