Fair dinkum 100% Aussie owned & operated

Wire - Hardfacing CRC (Gasless)

CRC is a premium quality hardfacing 'MIG' wire for components subject to high abrasion and low to moderate impact loading. Gasless (self-shielded) flux-cored wire, for ease of use in the field or in the workshop. Commonly used for ground-engaging applications, such as points, tynes, rippers, bucket lips & teeth, cutters, etc. Available in 1.2mm x 15kg, 1.2mm x 5kg & 1.6mm x 15kg.

Where to buy

Image Image Part No. Description Unit of Issue Enquiry Qty
WIRE-H/FACING SUPERSHIELD CRC 1.2MM 5KG
2-HFCRC08/12
200mm/5kg Spool 1.2mm
Unit:
SPL 5KG 8IN
WIRE-H/FACING SUPERSHIELD CRC 1.2MM 5KG
2-HFCRC08/12
200mm/5kg Spool 1.2mm
2-HFCRC08/12
SPL 5KG 8IN
WIRE-H/FACING SUPERSHIELD CRC 1.2MM 15KG
2-HFCRC15/12
300mm/15kg Spool 1.2mm
Unit:
SPL 15KG
WIRE-H/FACING SUPERSHIELD CRC 1.2MM 15KG
2-HFCRC15/12
300mm/15kg Spool 1.2mm
2-HFCRC15/12
SPL 15KG
WIRE-H/FACING SUPERSHIELD CRC 1.6MM 15KG
2-HFCRC15/16
300mm/15kg Spool 1.6mm
Unit:
SPL 15KG
WIRE-H/FACING SUPERSHIELD CRC 1.6MM 15KG
2-HFCRC15/16
300mm/15kg Spool 1.6mm
2-HFCRC15/16
SPL 15KG
Also Known As:
Hard Facing / Hard Surfacing / Welding Wire / Hyundai Supershield CrC / Hardfacing wire on 5kg small handy spool
Disclaimer:
Any product application information on this web page is presented as "typical” and an indicative guide only, without guarantee or warranty, and Weldclass expressly disclaims any liability incurred from any reliance thereon. No data is to be construed as an official recommendation for any welding condition or technique by Weldclass. The correct product(s), settings and techniques will vary in each application and users should conduct their own research to determine the correct product and method to use in their situation. E.&O.E.

WHY USE CRC HARDFACING WIRE ?
> Premium quality gasless hardfacing wire for components subject to severe abrasion and low to moderate impact loading
> Very high chromium content for exceptional wear life
> Proven to outlast standard hardfacing electrodes and wires many times over

APPLICATION INFO:
> Our No. 1 recommended hardfacing product for ground engaging equipment such as: points, tynes, bucket lips, rippers, etc
> Also used for conveyer screws, crushers, dredge cutter heads, rollers, etc
> Typical hardness 54-58 HRc

OPERATOR INFO:
> Gas not required
> Polarity: DC+ (wire/torch positive, earth negative)
> Position: Flat/horizontal (downhand) only
> Typical parameters: 120-200A / 20-30V (1.2mm)
> Suitable for multi-layering (up to 10 layers)

WHAT ELSE ?
> Surface will normally relief-checks (forms fine cracks) after welding
> Weld deposit IS machineable
> Weld deposit is NOT grind-able


RELATED INFO & ARTICLES
Introducing Platinum SD-980 Solid Hardfacing Wire

Used this product before? We would love to get your comments... be the first to review!