Plasma torch and consumable parts to suit Weldclass XTP series torches as fitted to 40P, 41PA, 43P & 45P plasma cutters, and various other brands and models of torches/machines including; Unimig Viper Cut 30, Cigweld CutSkill 35/45/60/EasyCut, WIA Cutmatic 45, Lincoln Invertec PC210 and more. See details below.
Weldclass products are sold through leading industrial supply stores across Australia & beyond.
So we can direct you to your nearest stockist, please:
Use ENQUIRY LIST
Browse products > Select a Qty > 'ADD TO ENQUIRY LIST' > Follow the prompts to submit. We will respond ASAP to advise your nearest stockist for the items you selected.
The products advertised above are original Weldclass products only. Weldclass is not affiliated in any way with other trade names or brands mentioned above, and any references to these trade names or brands and/or part numbers are for identification purposes only.
WC-06028 101.05
See fact sheet under Downloads tab for full details of compatability of these parts for Weldclass and other brands of plasma machines/torches.
Parts to suit XTP40 torch fitted to WELDCLASS Cutforce 40P & 45P machines:
WC-06028 Electrode Pk5
WC-06031 Swirl Ring
WC-06029 Tip 0.9mm 30-40A Pk5
WC-06032 Retaining Cap 6-Hole Std
WC-06033 Spacer / Stand-Off Guide
TJ1562 Roller Guide
TJ1202R Circle Guide
Parts to suit XTP60 torch fitted to WELDCLASS Cutforce 43P machine:
WC-06028 Electrode Pk5
WC-06031 Swirl Ring
WC-06029 Tip 0.9mm 30-40A Pk5
WC-06032 Retaining Cap 6-Hole Std
TJ1562 Roller Guide
TJ1202R Circle Guide
Note: Spacer / Stand-Off Guide should NOT be used on this machine. The 43P is designed for drag cutting only and will only operate if the tip contacts the work piece.
Parts to suit XTP60 torch fitted to WELDCLASS Cutforce 41PA machine with in-built air compressor:
WC-06028 Electrode Pk5
WC-06031 Swirl Ring
WC-06029 Tip 0.9mm 30-40A Pk5
WC-06458 Retaining Cap Special 4-Hole Type*
TJ1562 Roller Guide
TJ1202R Circle Guide
*Retaining cap with 4 port holes (rather than the standard 6-hole design) must be used on the 41PA machine, as it is specifically designed for use with in-built air compressor, which operates at lower air flow rate & pressure (vs machines that use standard external compressed air supply).
Note: Spacer / Stand-Off Guide should NOT be used on this machine. The 43P is designed for drag cutting only and will only operate if the tip contacts the work piece.
Parts to suit torch fitted to CIGWELD CutSkill 45/35/60 & EasyCut machines:
WC-06457 Electrode Pk5 (cross ref CSP337003)
WC-06031 Swirl Ring (cross ref CSP337007)
WC-06459 Tip 0.9mm 30-40A Pk5 (cross ref CSP337002)
WC-06032 Retaining Cap 6-Hole Std (cross ref CSP337005)
WC-06033 Spacer / Stand-Off Guide (cross ref CSP337004)
TJ1562 Roller Guide
TJ1202R Circle Guide
Parts to suit SC30 torch fitted to UNIMIG Viper Cut 30 machines:
WC-06028 Electrode Pk5 (cross ref WGSC2504)
WC-06031 Swirl Ring (cross ref WGSC2506)
WC-06029 Tip 0.9mm 30-40A Pk5 (cross ref WGSC2520-09)
WC-06032 Retaining Cap 6-Hole Std (cross ref WGSC2530)
WC-06033 Spacer / Stand-Off Guide (cross ref WGSC2540)
TJ1562 Roller Guide (cross ref WGSC2551)
TJ1202R Circle Guide (cross ref WGSC2550)
FAQs
Q: Are torch heads available for these torches?
A: Weldclass does not supply the torch head as a separate parts. This is becuase ongoing improvements have been made to both the torch and the torch head design over time (to improve reliability and longevity), and heads are not interchangeable across every different batch/version of the torch. We offer complete torches as listed on this page, which also means that the new/replacement torch will carry any design improvements that the manufacturer has implemented to date.
Shade 5 specs for use with Oxy cutting/welding/brazing and Plasma cutting. Popular alternative to oxy googles, lightweight & comfortable. Fit over some prescription spectacles (depending on the size of the spectacles), with a rim at the top designed to sit on the top edge of the spectacles underneath.
Protective face shields & visors, available in clear for general use and shade 5 for oxy and plasma applications. Robust, light weight & AS1337.1 high-impact rated.
Now available with 7-year warranty. Specially developed for use with Plasma cutting machines, the PLATINUM Z-20 high performance Air Filter is a superior alternative to traditional "roll" type filters. PLATINUM Z-20 will filter water, dust, oil and particles down to 1-micron and is virtually maintenance-free thanks to the self-draining feature and super long-life filter cartridge/element. Using a Z-20 filter will help to increase plasma consumables life, reduce operating cost, improve cutting performance & reduced the likelihood of torch & machine malfunction. A highly recommended accessory for all plasma cutters.. & other applications where air quality is critical. Click here to read why proper air filtration is critical for plasma cutting, and how the PLATINUM Z-20 compares to other filters.
Now available with 7-year warranty. With a cut capacity of 20mm (clean cutting of mild steel), severance capacity of 25mm, and 45% duty cycle at maximum output, the Force 45P* is one of the highest performing single-phase plasma cutters on the market. Weighing only 8kg and fitted with a 15A 240V plug, it's also super portable and versatile. PFC technology means the 45P is extremely power efficient, delivering higher duty cycle for longer cuts and higher productivity, even on heavier section material. With PFC, the 45P can be used on long extension leads (up to 100m) and is a great choice for operation on generator power, where required. Features a very high-quality 6m torch with 'Euro' style connection, Air regulator with nitto fitting, shoulder strap & much more! For maximum parts life and cutting performance, we highly recommend the optional Platinum Z-20 Air Filter/Dryer *Also known as Cutforce 45P- read more.
Now available with 10-year warranty The ULTRA 43P* plasma cutter offers all the benefits of European quality & technology with an impressive cut capacity of 16mm clean & 20mm severance (mild steel). Generator compatible and weighing just 7kg with a rugged "roll frame" design, it's also super portable and ready to withstand the rigours workshop, field or site work. Features a high-quality European-made 6m torch with 'Euro' style connection, Air regulator with nitto fitting, and is fitted with a 15A 240V plug. For maximum parts life and cutting performance, we highly recommend the optional Platinum Z-20 Air Filter/Dryer. *Also known as Cutforce 43P - read more.
Now available with 10-year warranty With a built-in maintenance-free air compressor, cut capacity of 12mm clean & 18mm severance (mild steel), rugged roll-frame design, and generator compatability - the ULTRA 41PA* is your "go anywhere" plasma cutter, ready to tackle the rigours of any workshop, field or site job. A tried and proven machine, Made in Europe. Supplied with a high-quality European-made 6m torch with 'Euro' style connection and fitted with a 15A 240V plug. *Also known as Cutforce 41PA - read more.